Cisco CCNA (200-301) Labs #3
Simulator Summary
0 of 15 Questions completed
Questions:
Information
You have already completed the simulator before. Hence you can not start it again.
Simulator is loading…
You must sign in or sign up to start the simulator.
You must first complete the following:
Results
Results
0 of 15 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
| Average score |
|
| Your score |
|
Categories
- Not categorized 0%
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 15
1. Question
Verify the path traffic takes from PC1 with IP 20.20.20.67 to PC2 with IP 45.1.2.3.
-
PC1>
CorrectIncorrect -
-
Question 2 of 15
2. Question
Lab topology
You are connected to the Cisco device R1. Enter the commands on the router to enable RIP on the interface f0/0.
-
R1#
R1#
CorrectIncorrect -
-
Question 3 of 15
3. Question
Lab topology
You are connected to the Cisco device R1. Enter the commands on the router to enable OSPF on the interface f0/0.
-
R1#
R1#
CorrectIncorrect -
-
Question 4 of 15
4. Question
You are connected to the Cisco device R1. Enter the command on the router to remove OSPF on the interface f0/0.
-
R1#
CorrectIncorrect -
-
Question 5 of 15
5. Question
Lab topology
You are connected to the Cisco device R1. Enter the commands on the router to enable EIGRP with AS 100 on the interface f0/0.
-
R1#
R1#
CorrectIncorrect -
-
Question 6 of 15
6. Question
Lab topology
You have just configured EIRP routing on the topology. Enter the command to verify the changes to the routing table on R1.
-
R1#
CorrectIncorrect -
-
Question 7 of 15
7. Question
Lab topology
You have just configured EIRP routing on the topology. Enter the command to verify the routers have formed adjacencies with each other.
-
R1#
CorrectIncorrect -
-
Question 8 of 15
8. Question
Lab topology
You are connected to the Cisco device R1 and you have just configured EIRP routing on the topology. Enter the command to verify the path via R2 is a Feasible Successor.
-
R1#
CorrectIncorrect -
-
Question 9 of 15
9. Question
Enable a loopback interface on Router R1. Use the IP address 192.168.1.1/32.
-
R1(config)#
R1(config-if)#
CorrectIncorrect -
-
Question 10 of 15
10. Question
Lab topology
You have just configured OSPF routing on the topology. Enter the command to verify the routers have formed adjacencies with each other.
-
R1#
CorrectIncorrect -
-
Question 11 of 15
11. Question
You are performing a VLAN configuration for a campus network. View the VLAN database on SW1 to verify no VLANs have been added.
-
SW1#
CorrectIncorrect -
-
Question 12 of 15
12. Question
View the default switchport status on the gig0/1 from SW1-Dojo.
-
SW1-Dojo#
CorrectIncorrect -
-
Question 13 of 15
13. Question
Configure SW1-Dojo as a VTP server in the VTP domain dojolab.
-
SW1(config)#
SW1(config)#
CorrectIncorrect -
-
Question 14 of 15
14. Question
You are connected to SW1-Dojolab, enter the commands to create a VLAN with ID 150, and name it SALES.
-
SW1-Dojolab(config)#
SW1-Dojolab(config-vlan)#
CorrectIncorrect -
-
Question 15 of 15
15. Question
The interface f0/1 on the SW1-Dojolab is connected to PC1. Configure the switchport connected to the PC with the VLAN 10.
-
SW1-Dojolab(config)#
SW1-Dojolab(config-if)#
SW1-Dojolab(config-if)#
CorrectIncorrect -