0 of 15 Questions completed
Questions:
You have already completed the simulator before. Hence you can not start it again.
Simulator is loading…
You must sign in or sign up to start the simulator.
You must first complete the following:
0 of 15 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Average score |
|
Your score |
|
Lab topology
Verify connectivity between the routers R1 f0/0 and R2 f0/0.
R1#
R2#
Lab topology
View the dynamically learned MAC addresses on SW2.
SW2#
Lab topology
You are connected to the Cisco device R1. Type the command to configure the ip address on the interface FastEthernet0/0 with subnet mask 255.255.25.0. (don’t use abbreviated commands)
R1(config)#
R1(config-if)#
R1(config-if)#
Lab topology
You are connected to the Cisco device R1. Type the command to check what routes are in the routing table.
R1#
Lab topology
You are connected to the Cisco device R1. Configure a static route to 10.10.20.0/24 with a next-hop address of 10.10.10.2
R1(config)#
Lab topology
Type the command to configure the R1 as DNS server for the dojopass.org domain.
R1(config)#
R1(config)#
R1(config)#
R1(config)#
You are connected to the Cisco device R1-Dojo. Type the command to verify the ARP cache on R1-Dojo.
R1-Dojo#
Lab topology
R3 has just been configured as a server for the dojopass.org domain. Your co-workers have complained that DNS is not operational anymore. From R2, use Telnet to check if the DNS service appears operational on R3.
R2#
Lab topology
The FastEthernet1/0 facing R3 is administratively shutdown and the DNS service is not operational, fix the issue.
R2(config)#
R2(config-if)#
Enter the following description on the interface fastEthernet F0/0. (don’t use abbreviated commands)
“Link to printer”
R1(config)#
R1(config-if)#
On SW1 interface f0/1, verify that speed and duplex are automatically negotiated to 100 Mbps full-duplex on the link to R1.
SW1#
Type the command to find out what version of IOS is the switch SW1-Dojo running?
SW1-Dojo#
Type the command to set the enable secret ‘dojolab’ on the R1-Dojo router.
R1-Dojo(config)#
Back up all the changes you made recently on R3 from the running configuration to Flash.
R3#
Lab topology
Verify the routes that have been automatically added for the connected and local networks.
R1#